Alarko Cast Iron Boiler
22 models with capacities between 65.000-800.000 Kcal/hour.Elastic Casting Technology:
Cast iron panel boilers are produced by using Elastic Casting Technology provided by special
alloys of EN GJL 200 material. The resistant of the cast sections against to thermal shocks is
increased to high levels by the special alloy materials used at cast production.
With its special designed combustion chamber perfect conditions of combustion and lowest
values for emission rates.
3 Pass Flue Gas System:
3 Pass Flue Gas System Most efficient burnery is attained by forcing flames & combustion gases
to flow through 3 independent parts of heat transfer volumes. Flow through low temperature
combustion chamber allows low NOx values to be attained than regular boiler systems.
By covering the iron cast boiler sections with 80 mm glass wool including aluminum folio coating
perfect insulation is provided. By using ceramic fiber insulation
material with 1300°C resistant at the front cover the high
temperature may occur here is prevented.
With special designed winglets inside the combustion
chamber and combustion gas pipes
the heat transmission surfaces are
increased and so by maximization
of the heat transmission boiler output
Compatible Operation With
Gas/Diesel Fuel Burners:
Full operating compatibility with
standards, gas, diesel and fuel oil
burners and efficient operating.
Monitoring of the burner flame
without opening the front cover is
possible by monitoring glass resistant
against high temperature.
Because the cast iron boilers can be
carried as slices to the boiler room, it
does not create a problem, such as
destruction of any wall. The installation
is very easy.
Simple and Easy
Because the front cover can be removed
from front side it makes simpler the
Full Quality Control:
The boiler panels were tested 100% at
The cast iron boilers are under the 5
years guarantee of manufacturer for the